Mississippi

Mississippi uses a single-board model. The Mississippi State Board of Contractors (MSBOC) licenses both commercial and residential contractors, with separate threshold tiers and an extensive classification system spanning six major categories and dozens of specialties.

Always verify statutes, fees, and application details with the live regulator before making bidding, licensing, or legal decisions.

At a glance

The fastest way to orient yourself in Mississippi is to know these key signals.

Signal	Value
Commercial contractor trigger	Work over $50,000 (general or subs)
Residential builder trigger	New construction over $50,000
Residential remodeler trigger	Improvements over $10,000 (including roofing)
Fire sprinkler trigger (public)	Work over $5,000 on public projects
Fire sprinkler trigger (private)	Work over $10,000 on private projects
Residential subcontractors	Life safety trades (electrical, plumbing, HVAC, mechanical) — regulated regardless of amount
Net worth requirement (major)	At least $50,000 for major classifications
Net worth requirement (other)	At least $20,000 for non-major classifications
Reciprocity model	Single board — extensive agreements with 10 states

Frequently asked questions

Pick the tab that matches your situation. Each FAQ gives a direct answer and points you to the full detail below.

Contractors
Regulators

At what contract value does Mississippi require a commercial contractor license?

Commercial contractors (both general and subcontractors) must be licensed for work over $50,000. This applies to any commercial or industrial project. See Construction work regulated.

Does Mississippi require a license for residential remodeling or roofing?

Yes. Residential remodelers, including roofers, must be licensed for improvements over $10,000. Residential new construction triggers at $50,000. See Construction work regulated.

Do residential subcontractors in electrical, plumbing, or HVAC need a license?

Yes. Residential subcontractors in life safety trades — electrical, plumbing, HVAC, and mechanical — are regulated regardless of contract value. This is one of the few areas in Mississippi where there is no dollar threshold. See Construction work regulated.

Where do I go to get licensed in Mississippi?

All contractor licensing in Mississippi — commercial and residential — goes through a single board: the Mississippi State Board of Contractors (MSBOC) in Jackson. There is no secondary board to check. See Who regulates construction.

How much does it cost to get licensed?

Commercial contractors pay $400 for an application (includes one classification) plus $100 per additional classification. Residential contractors pay $50 for an application (includes one classification) plus $100 per additional classification. All applicants must also pass the Law and Business Management exam. See Requirements.

What are the insurance and net worth requirements?

Commercial contractors must carry $300,000 / $600,000 liability insurance and demonstrate a net worth of at least $50,000 for major classifications or $20,000 for other classifications. A reviewed or audited CPA financial statement is required (compilations not accepted). See Requirements.

Can I use my out-of-state license in Mississippi?

MSBOC has reciprocal agreements with 10 states. If you hold an unlimited license in a reciprocal state and meet the years-held requirement, your trade exam may be waived. However, every applicant must still pass the Mississippi Law and Business Management exam. See Reciprocal agreements.

Are subcontractors required to be licensed?

Yes, for commercial work over $50,000. The same threshold applies to subcontractors as to general contractors. Residential life safety trade subcontractors are regulated regardless of dollar amount. See Construction work regulated.

What if my project involves fire sprinkler work?

Fire sprinkler work is a standalone classification. It triggers at $5,000 on public projects and $10,000 on private projects. Applicants must submit proof of NICET Level III certification. See Construction work regulated.

Does Mississippi require a license for solar contractors?

Yes. Residential solar contractors are regulated under the MSBOC residential licensing framework. See Types of licenses for the full residential classification list.

What contractor licenses would our company need to bid a $500,000 commercial construction project in Mississippi?

At minimum, a commercial contractor license from MSBOC with the appropriate major classification (such as Building Construction). You would need a reviewed or audited financial statement showing at least $50,000 net worth, $300,000 / $600,000 liability insurance, and to pass the Law and Business Management exam plus any applicable trade exam. If the project includes electrical, plumbing, HVAC, or mechanical subcontractors, they also need their own licenses. See Requirements.

How does Mississippi's licensing model compare to multi-board states?

Mississippi uses a single-board model where the MSBOC handles all commercial and residential contractor licensing. This contrasts with states like Alabama (8 boards) or North Carolina (7 boards). The single-board approach simplifies reciprocity analysis and fee comparisons. See Who regulates construction.

How does Mississippi's $50,000 commercial threshold compare to other states?

The $50,000 threshold is moderate. Some states trigger as low as $500 or $1,000, while others like Alabama trigger at $100,000. Mississippi also has distinct thresholds for residential new build ($50,000), remodeling ($10,000), and fire sprinkler ($5,000 / $10,000). For cross-state comparison, see Licensing thresholds.

What types of construction work are regulated at the state vs. local level?

Mississippi regulates at the state level through MSBOC for all commercial and residential contractor licensing. The classification system has 6 major categories: Building Construction, Electrical, Highway/Street/Bridge, Heavy Construction, Municipal/Public Works, and Mechanical. Local jurisdictions may impose additional permitting requirements, but the primary regulatory framework is state-level.

What are the fees across commercial vs. residential categories?

Commercial applications are $400 (includes one classification) with $100 per additional classification. Residential applications are $50 (includes one classification) with $100 per additional classification. The significant fee gap reflects different financial qualification and insurance requirements between the two categories. See Requirements.

What license classifications does Mississippi use?

Mississippi organizes credentials into six major commercial categories (Building Construction, Electrical, Highway/Street/Bridge, Heavy Construction, Municipal/Public Works, Mechanical), each with dozens of specialty subcategories. Residential licensing has its own set of classifications including Builder, Remodeler, Roofer, and trade-specific categories. Fire Sprinkler Work is a standalone classification requiring NICET Level III. See Types of licenses.

How does reciprocity work in Mississippi?

MSBOC has reciprocal agreements with 10 states. All agreements waive only the trade exam — the Mississippi Law and Business Management exam is always required. Each agreement has specific classification restrictions and conditions. Alabama alone covers 5 separate boards (General Contractors, Electrical, HVAC, Home Builders, Plumbers). See Reciprocal agreements.

What exam requirements exist for Mississippi contractors?

All applicants must pass the Law and Business Management exam. Commercial and residential applicants also take applicable trade exams. Fire sprinkler applicants must hold NICET Level III certification in lieu of a trade exam. Reciprocal state applicants may have the trade exam waived, but the Law and Business Management exam is never waived. See Requirements.

What are the financial statement requirements?

Commercial contractors must submit a reviewed or audited CPA financial statement within the last 12 months — compilations are not accepted. Net worth requirements are $50,000 for major classifications and $20,000 for non-major classifications. Residential contractors do not have the same financial statement requirement but must show experience and meet insurance minimums. See Requirements.

How does Mississippi compare to other Southern states in regulatory complexity?

Mississippi’s single-board model is among the simplest in the South. States like Alabama (8 boards), North Carolina (7 boards), and South Carolina (4 agencies) have more fragmented systems. The single-board approach means reciprocity, fee structures, and classification systems are all managed centrally. See the South region guide.

What are the renewal cycles for Mississippi licenses?

Both commercial and residential licenses are subject to MSBOC renewal requirements. Separate commercial and residential requirements apply for insurance, financial statements, and references. Contact MSBOC directly for current renewal cycle timing. See Requirements.

Start with your goal

Pick the card that matches what you need right now. Each one links to the relevant section on this page.

Is licensure triggered?

Start with threshold and work-lane rules, then confirm which classification applies.

Find the right regulator

Use the regulator directory to contact the Mississippi State Board of Contractors.

Application and renewal details

Exams, fees, insurance, financial statements, and classification details.

Reciprocity direction

Find out which states have trade exam waivers through MSBOC reciprocal agreements.

Special considerations

Different roles need different things from a Mississippi page. Use the tab that matches your situation to see what matters most before you read the full detail below.

Contractors
Regulators

Start with contract value and project type. Mississippi has different thresholds for commercial ($50,000), residential new build ($50,000), residential remodeling ($10,000), and fire sprinkler work ($5,000 / $10,000).

Commercial contractors (general or subs) need a license for work over $50,000.
Residential builders need a license for new construction over $50,000; remodelers for work over $10,000.
Residential subcontractors in life safety trades (electrical, plumbing, HVAC, mechanical) are regulated regardless of contract value.
Commercial applicants must demonstrate a net worth of at least $50,000 for major classifications or $20,000 for others.
All applicants must pass a Law and Business Management exam, plus any applicable trade exam.
Commercial contractors must carry $300,000 / $600,000 liability insurance.

Readiness checklist

Four things you need to confirm before you can treat Mississippi as “ready” for a bid or an application. If any of these are unclear, you are not ready yet.

Classify the project

Determine whether the work is commercial, residential new build, residential remodel, fire sprinkler, or residential life safety subcontracting. Each has a different threshold.

Apply the right threshold test

Check $50,000 for commercial and residential new build, $10,000 for remodeling, $5,000 / $10,000 for fire sprinkler (public / private). Residential life safety subs are regulated regardless of value.

Route to MSBOC

All licensing goes through the Mississippi State Board of Contractors. There is no secondary board to check.

Confirm the requirement set

Confirm your classification, net worth requirement ($50,000 major / $20,000 other), insurance minimums, financial statement, references, and exam requirements before filing.

If you can identify project type, threshold, classification, and requirement set, you have the minimum package needed for a Mississippi readiness check.

Use these links to jump to related cross-state comparisons and workflows.

New state evaluation if you are screening Mississippi for the first time.
Multi-state bid readiness if you need to compare Mississippi with nearby jurisdictions.
Licensing thresholds or prequalification patterns for cross-state context.

Construction work regulated

Mississippi’s licensing triggers vary by project type, contract value, and whether the project is public or private. Residential subcontractors in life safety trades are regulated regardless of dollar amount.

Work lane	What triggers regulation
Commercial contractors (general or subs)	Work over $50,000
Residential builder (new construction)	Work over $50,000
Residential remodeler (including roofing)	Improvements over $10,000
Fire sprinkler (public projects)	Work over $5,000
Fire sprinkler (private projects)	Work over $10,000
Residential subcontractors (life safety)	Electrical, plumbing, HVAC, mechanical — regulated regardless of amount
Residential construction managers	Regulated
Residential solar contractors	Regulated

Fire Sprinkler Work is a standalone classification. Applicants must submit proof of NICET Level III certification.

Common determination scenarios

If you are trying to figure out where to start, expand the scenario that is closest to your situation.

Commercial building project over $50,000

Apply to MSBOC for a commercial contractor license. You will need a reviewed or audited financial statement (not a compilation), a net worth of at least $50,000 for a major classification, $300,000 / $600,000 liability insurance, workers’ comp if 5+ employees, three references (one from a bank), and to pass the Law and Business Management exam plus any applicable trade exam.

Residential new construction over $50,000

Apply to MSBOC for a Residential Builder license. Requirements include a $50 application fee (plus $100 per additional classification), liability insurance, three references, proof of experience, and the Law and Business Management exam plus a trade exam.

Residential remodeling over $10,000

Apply to MSBOC for a Residential Remodeler license. The threshold is lower than new construction — $10,000 for improvements to existing residences, including roofing work.

Fire sprinkler installation

Fire sprinkler work is triggered at $5,000 on public projects or $10,000 on private projects. This is a standalone classification requiring NICET Level III certification.

Out-of-state contractor with reciprocity

MSBOC has reciprocal agreements with 10 states. If you hold an unlimited license in a reciprocal state and meet the years-held requirement, your trade exam may be waived — but you must still pass the Mississippi Law and Business Management exam. Check the reciprocity table for state-specific restrictions.

Who regulates construction

Mississippi consolidates all contractor licensing under a single board. There is no secondary agency to check for trade-specific credentials.

All commercial and residential licensing — Mississippi State Board of Contractors

2679 Crane Ridge Drive, Suite C, Jackson, MS 39216Phone: (800) 880-6161 / (601) 354-6161 | Fax: (601) 354-6715Website: msboc.us

Requirements

Mississippi separates requirements for commercial and residential applicants. Both categories must pass the Law and Business Management exam. Fee tables and insurance minimums differ by contractor type.

Commercial Contractors

Requirement	Detail
Exam	Law and Business Management exam required for all applicants, plus trade exam if applicable
Experience	Must show experience in the classification(s) of work requested
Financial statement	Reviewed or audited CPA financial statement within the last 12 months (compilations not accepted)
Net worth (major classification)	At least $50,000
Net worth (other classifications)	At least $20,000
Liability insurance	$300,000 per occurrence / $600,000 aggregate
Workers’ comp	Required if 5 or more employees
References	3 letters (1 from bank, 2 from construction-related contacts)
Entity registration	Corporations and LLCs must be registered with the Mississippi Secretary of State
Tax ID	Mississippi sales tax or use tax number required, plus state or federal income tax ID

Fee type	Amount
Application fee (includes 1 classification)	$400
Each additional classification	$100

Residential Contractors (Builders, Remodelers, Roofers, Subs)

Requirement	Detail
Exam	Law and Business Management exam required, plus trade exam
Experience	Must show experience in the classification(s) requested
Liability insurance	General liability required (coverage amount confirmed at application)
Workers’ comp	Required if 5 or more employees
References	3 letters (1 from bank, 2 from construction-related contacts)
Entity registration	Corporations and LLCs must be registered with the Mississippi Secretary of State
Tax ID	Mississippi income tax ID, federal tax ID, or Social Security Number

Fee type	Amount
Application fee (includes 1 classification)	$50
Each additional classification	$100

Reciprocal agreements

Mississippi has reciprocal agreements with 10 states through the MSBOC. In all cases, the trade exam may be waived if the applicant holds an unlimited license for the required number of years in the reciprocal state — but every applicant must still pass the Mississippi Law and Business Management exam.

Reciprocity in Mississippi waives the trade exam only. The Law and Business Management exam is always required.

State	What is waived	Conditions
Alabama — General Contractors Board	All except mechanical and plumbing	Must have taken the Alabama exam
Alabama — Electrical Contractors Board	Trade exam	Must have taken the Alabama exam
Alabama — HVAC Board	Trade exam	Must have taken the Alabama exam
Alabama — Home Builders Board	Trade exam	Must have taken the Alabama exam
Alabama — Plumbers & Gas Fitters Board	Commercial plumbing exam only	Must have taken the Alabama exam
Arkansas	All except mechanical and electrical	Must have taken the Arkansas exam
Florida	General or residential building construction	Must have taken the Florida exam
Georgia	Commercial and residential building only	Must have taken the Georgia exam
Louisiana	All except mechanical or plumbing (HVAC can be waived)	Must have taken the Louisiana exam
North Carolina — Electrical Board	Electrical and alarm systems only	Must have taken the NC exam
North Carolina — General Contractors Board	Building, residential, concrete, grading, excavating, roofing, pools, water/sewer	Must have taken the NC exam
Ohio	Electrical, HVAC, plumbing, and/or refrigeration only	Must have taken the Ohio exam
South Carolina — Contractors Board	Building and electrical only	Must have passed PSI, Experior, Block, or NAI exam
South Carolina — Residential Builders	Trade exam	Must have taken the SC exam
Tennessee	Trade exam	Must have taken the Tennessee exam

Types of licenses

Mississippi’s classification system is organized into six major categories, each with dozens of specialty subcategories. Residential licensing has its own separate set of classifications.

Major Classifications

Building Construction
Electrical Work
Highway, Street and Bridge Construction
Heavy Construction
Municipal and Public Works
Mechanical Work

Building Specialties

Acoustical and Drywall Treatment
Cabinets and Millwork
Carpentry and Framing
Concrete
Concrete Paving
Concrete Reinforcing
Construction Management
Conveyor Systems
Crane Construction and Repair
Demolition
Elevators and Escalators
Excavation, Grading and Drainage
Fencing
Fireproofing
Floor Covering
Glass, Glazing, Windows and Skylights
Hazardous Materials
Hydroblasting and Sandblasting
Installation of Linings and Coatings
Insulation (Walls, Attics, Exterior)
Interior Finishing
Landscaping, Grading and Beautification
Lathing, Plastering and Stucco
Marine Construction
Masonry, Brick and Stone
Metal Buildings
Millwright
Ornamental Iron and Miscellaneous Metal
Painting
Piers, Caissons, Pile Driving
Refractory Work
Remodeling
Rigging, House Moving, Wrecking and Dismantling
Roofing, Sheet Metal and Siding
Scaffolding
Sheetmetal
Sign Erection
Structural Steel
Swimming Pools
Tanks and Vessels
Tile and Marble
Towers
Waterproofing
Welding

Electrical Specialties

Alarm Systems, Access Systems, and Security Equipment
Communication Systems and Low Voltage
Electrical Installation of Automated Meter Reading Equipment
Instrumentation (Electrical)
Telecommunications
Traffic Control (Electrical)
Transmission and Distribution Lines
Turbine Generator Maintenance and Repair
Underground Cable Installation

Highway and Heavy

Highway, Street and Bridge specialties:

Asphalt Milling and Recycling
Asphalt Paving
Boring and Tunneling
Concrete Paving
Erosion Control
Grinding, Grooving and Grouting (Roads)
Right of Way Clearing
Road Sweeping
Soil Drainage Wicks
Traffic Control, Signs, Striping, Guardrails (Non-Electrical)

Heavy Construction specialties:

Dams, Reservoirs, Flood Control Work
Dredging
Geotextile and Membrane Linings
Grain Elevators and Silos
Marine Construction
Oil Field Construction
Oil Refineries
Pipeline Construction
Railroad Construction
Retention Systems

Mechanical Specialties

Boiler Installation and Repair
Cathodic Protection
Ductwork for Heating, A/C and Ventilation
Fueling Systems
HVAC
Instrumentation, Controls and Energy Management (Mechanical)
Insulation (Mechanical Pipes and Duct Work)
Irrigation Systems
Millwright
Plumbing
Process Piping
Refrigeration
Swimming Pools
Underground Utilities
Welding

Residential

Residential Builder
Residential Remodeler
Residential Roofer
Residential Electrical
Residential Mechanical
Residential HVAC
Residential Plumbing
Residential Construction Manager
Residential Solar

Standalone

Fire Sprinkler Work (requires NICET Level III certification)

South region guide

Browse all South jurisdictions for comparison.

Contractors guide

Cross-state guidance for contractors evaluating new jurisdictions.

Regulators guide

Cross-state guidance for comparing regulatory models and agency structures.

Neighboring jurisdictions with reciprocity ties:

Alabama

Reciprocity across 5 Alabama boards — general contractors, electrical, HVAC, home builders, and plumbers.

Arkansas

Trade exam waiver for all except mechanical and electrical classifications.

Louisiana

Trade exam waiver for all except mechanical or plumbing (HVAC can be waived).

Tennessee

Trade exam waiver with Tennessee Board for Licensing Contractors.

Georgia

Waives commercial and residential building classifications.

Florida

Waives general or residential building construction.

Start Here

Northeast

South

Midwest

West

Territories and DC

At a glance

Frequently asked questions

Start with your goal

Is licensure triggered?

Find the right regulator

Application and renewal details

Reciprocity direction

Special considerations

Readiness checklist

Navigation

Construction work regulated

Common determination scenarios

Who regulates construction

Requirements

Reciprocal agreements

Types of licenses

See also

South region guide

Contractors guide

Regulators guide

Alabama

Arkansas

Louisiana

Tennessee

Georgia

Florida

Start Here

Northeast

South

Midwest

West

Territories and DC

​At a glance

​Frequently asked questions

​Start with your goal

Is licensure triggered?

Find the right regulator

Application and renewal details

Reciprocity direction

​Special considerations

​Readiness checklist

​Navigation

​Construction work regulated

​Common determination scenarios

​Who regulates construction

​Requirements

​Reciprocal agreements

​Types of licenses

​See also

South region guide

Contractors guide

Regulators guide

Alabama

Arkansas

Louisiana

Tennessee

Georgia

Florida

At a glance

Frequently asked questions

Start with your goal

Special considerations

Readiness checklist

Navigation

Construction work regulated

Common determination scenarios

Who regulates construction

Requirements

Reciprocal agreements

Types of licenses

See also